OEM ODM Customized T5 T10 T20 Timing Belt
video

OEM ODM Customized T5 T10 T20 Timing Belt

We have a series of standard synchronous belts to choose from. At the same time, we also support customized synchronous belts according to drawings.
Send Inquiry
Product Introduction

Tianjin OuNaiDa Transmissions Technology Co., Ltd. is one of the leading manufacturers and suppliers of oem odm customized t5 t10 t20 timing belt in China. If you're going to buy high quality oem odm customized t5 t10 t20 timing belt, welcome to get more information from our factory. Also, custom service is available.

 

Description

 

1.Model(ARC or T Type Teeth):

MXL,XL,L,H,XH,XXH,T2.5,T5,T10,T20,3M,5M,8M,14M,20M,S2M,S3M,S5M,S8M,S14M...

 

2.Material:Rubber and PU;

 

3.Length:1M,2M,3M,4M,5M....100M... etc;

 

4.Width:10mm,20mm,30mm,40mm,etc;

 

5.Surface treatment:

We can prevent slipping by adding green cloth to the surface of the synchronous belt;

The surface can be drilled as per your requirements.

 

6.Both ends of the timing belt:Round endless or Open endless.

 

We also have synchronous wheels for use with timing belts.

 

Features

 

FAQ

1. Q:What tooth profile can you produce?

A:T2.5, T5, T10, AT3, AT5, AT10, HTD3M, HTD5M, HTD8M, HTD14M, MXL, XL, L, H, S2M, S3M, S5M, S8M, S14M, GT2, GT3, GT5, GT8, GT14, RPP5, RPP8

 

2. Q:What material do you use?

A:PU,Rubber.

 

3.Q: What's your lead time?

A:15 days for samples, 30 days for production (1,000 pcs)

 

4.Q: How do you deliver the product?

A:Wooden pallet for sea shipment, paper box for air shipment or Express.

 

 

Polyurethane timing belt is made of thermoplastic polyurethane material, with high wear resistance; precise transmission, smooth transmission; shock absorption, low noise, wide transmission ratio range; high transmission efficiency; oil-resistant, heat-resistant, aging-resistant, ozone-resistant, and crack-resistant. Add a layer of green nylon cloth to reduce noise, be more wear-resistant and corrosion-resistant or high-load.

 

1. Green cloth on the tooth surface: It is mostly used in high-speed systems, because the synchronous belt and the synchronous wheel will inevitably make noise when they are meshed and transmitted. The purpose of adding green cloth on the tooth surface of the synchronous belt is to reduce the noise. Its existence makes a buffer zone between the synchronous belt teeth and the synchronous wheel teeth, so that they are no longer mechanically moving when meshing and transmitting, reducing the friction coefficient and achieving the effect of reducing noise.


2. Adding green cloth on the back: Adding green cloth on the back of the synchronous belt is not a measure to reduce noise, because in some special conveying occasions, it is necessary to increase the friction on the back of the synchronous belt, so as to add green cloth on the back of the synchronous belt, which can effectively increase the friction, thereby meeting production needs, effectively preventing slippage, pollution and protecting product transportation, etc.

 

teeth type_

all types

 

Hot Tags: oem odm customized t5 t10 t20 timing belt, China oem odm customized t5 t10 t20 timing belt manufacturers, suppliers, factory, steel cord reinforcement for timing belt, polyester fiber reinforcement for timing belt, punched teeth of timing belt, Round Endless Timing Belt, natural rubber for timing belt, Self Tracking Timing Belt

Send Inquiry

whatsapp

Phone

VK

Inquiry