Nov 05, 2022 Leave a message

History of gears

In the West, Aristotle, an ancient Greek philosopher, expounded the problem of using bronze or cast iron gears to transmit rotary motion in Mechanical Problems in 300 BC. Aristotle and Archimedes, famous Greek scholars, both studied gears. The famous Greek inventor Guticibis evenly inserted pins on the edge of the round plate workbench to make it mesh with the pin wheel. He applied this mechanism to the engraving leakage. This happened about 150 BC. In 100 BC, Alessanian inventor Herren invented the odometer, in which gears were used. In the first century AD, the waterwheel pulverizer made by the Roman architect Bidobis also used a gear transmission device. By the 14th century, gears were used in clocks and watches.

In the early Eastern Han Dynasty (the 1st century AD), there were herringbone gears. The Guide Car and Jili Drum Car appeared during the Three Kingdoms Period have adopted the gear transmission system. The water rotary continuous mill invented by Du Yu in the Jin Dynasty transfers the power of the water wheel to the stone mill through gears. The earliest record of the gear transmission system in the history books is the description of the water transport armillary sphere made by Liang Lingzan in 725 in the Tang Dynasty. The water transport instrument stage (see ancient Chinese timers) made in the Northern Song Dynasty used a complex gear system. The Wu Bei Zhi (written in 1621) written by Mao Yuanyi in the Ming Dynasty recorded a kind of rack and pinion transmission device. An iron spike gear with a diameter of about 80mm was found in the ancient city site of Anwuji, Hebei, excavated in 1956. Although it is incomplete, its iron quality is good. Through research, it is confirmed that it is a product from the end of the Warring States Period (3rd century BC) to the Western Han Dynasty (206-24 BC). In 1954, a bronze spur gear was unearthed in Renjiaya, Yongji County, Shanxi Province. Referring to the artifacts unearthed in the same pit, it can be concluded that they are relics of the Qin Dynasty (221~206 BC) or the early Western Han Dynasty, with 40 teeth and a diameter of about 25 mm. As for the use of spur gears, no written records have been found so far. It is speculated that they may be used for braking to prevent the axle from reversing. In 1953, a pair of bronze herringbone gears were unearthed in Hongqing Village, Chang'an County, Shaanxi Province. According to the analysis of the tomb structure and tomb objects, it can be concluded that the gears were originated in the early Eastern Han Dynasty. Both wheels have 24 teeth and a diameter of about 15mm. The same herringbone gear has been found in Hengyang and other places.

As early as 1694, the French scholar PHILIPPE DE LA HIRE first proposed that the involute can be used as the tooth profile curve. In 1733, French M CAMUS proposed that the common normal of the gear tooth contact point must pass through the node on the center line. When an auxiliary instantaneous center line rolls along the instantaneous center line (pitch circle) of the big wheel and the small wheel respectively, the two tooth profile curves formed by the auxiliary tooth form fixed to the auxiliary instantaneous center line on the big wheel and the small wheel are conjugate with each other, which is CAMUS theorem. It considers the meshing state of two tooth surfaces; The modern concept of contact point trajectory is clearly established. In 1765, L. EULER of Switzerland proposed the mathematical basis for the analytical study of involute tooth profile, and clarified the relationship between the curvature radius of the tooth profile curve and the position of the curvature center of a pair of meshing gears. Later, SAVARY further completed this method and became the EU-LET-SAVARY equation. ROTEFT WULLS contributed to the application of involute tooth profile. He proposed that when the center distance changes, the involute gear has the advantage of constant angular speed ratio. In 1873, HOPPE, a German engineer, proposed the involute profile of gears with different number of teeth when the pressure angle changes, which laid the ideological foundation for modern modified gears.

At the end of the 19th century, the principle of generative gear cutting and the emergence of special machine tools and tools for gear cutting based on this principle made the involute tooth profile show great advantages after gear processing has a relatively complete means. As long as the gear cutting tool is moved slightly from the normal meshing position during gear cutting, the corresponding modified gear can be cut on the machine tool with a standard tool. In 1908, the Swiss MAAG studied the method of gear shifting and manufactured a gear shaping machine for generative machining. Later, British BSS, American AGMA and German DIN successively proposed a variety of calculation methods for gear shifting.

In order to increase the service life of power transmission gear and reduce its size, in addition to the improvement of materials, heat treatment and structure, circular arc tooth gear has been developed. In 1907, FRANK HUMPHRIS, an Englishman, first published the circular tooth profile. In 1926, the Swiss ERUEST WILDHABER obtained the patent right of the normal circular arc helical gear. In 1955, M.L.NOVIKOV of the Soviet Union completed the practical research of circular arc tooth gear and won the Lenin Medal. In 1970, R.M.STUDER, an engineer of ROLH ROYCE Company in Britain, obtained the American patent for double circular arc gear. This kind of gear has been paid more and more attention, and has played a significant role in production.

Gear is a kind of mechanical parts with teeth that can mesh with each other. It is widely used in mechanical transmission and the whole mechanical field. Modern gear technology has reached: gear module 0.004-100mm; The gear diameter ranges from 1 mm to 150 m; The transmission power can reach 100000 kilowatts; Rotating speed can reach several hundred thousand rpm; The maximum circumferential speed is 300 m/s.

With the development of production, the stability of gear operation is paid attention to. In 1674, Danish astronomer Romer proposed for the first time to use epicycloid as the tooth profile curve to obtain a stable gear.

During the industrial revolution in the 18th century, gear technology developed at a high speed, and people carried out a lot of research on gears. In 1733, French mathematician Cami published the basic law of tooth profile meshing; In 1765, Euler, a Swiss mathematician, proposed to use involute as the tooth profile curve.

The gear hobbing machine and gear shaping machine appeared in the 19th century solved the problem of mass production of high-precision gears. In 1900, Praft installed a differential device for the gear hobbing machine, which can process helical gears on the gear hobbing machine. Since then, gear hobbing by the gear hobbing machine has been popularized, and gear processing by the generating method has taken an overwhelming advantage, and the involute gear has become the most widely used gear.

In 1899, Lasher was the first to implement the scheme of modified gears. The modified gear can not only avoid undercutting, but also match the center distance and improve the bearing capacity of the gear. In 1923, Wilder Hubble of the United States first proposed the gear with circular arc tooth profile. In 1955, Sunovikov carried out in-depth research on circular arc gear, and the circular arc gear was then applied to production. The bearing capacity and efficiency of this kind of gear are relatively high, but it is not as easy to manufacture as the involute gear, which needs further improvement.


Send Inquiry

whatsapp

Phone

VK

Inquiry