Nov 04, 2022 Leave a message

Synchronous belt solution

1. Do not kink the belt, install wide belt or large pulley, increase pulley diameter or wide belt, remove foreign matters and tighten correctly;

2. Correctly tension, install belts with wider width and higher power transmission/increase the size of synchronous belt and pulley, check the belt type, and replace them if necessary

Replace;

3. Replace the timing pulley;

4. Re align the shaft, replace the pulley flange, and reinforce the bearing or chassis;

5. Replace flange pulley, realign pulley/shaft, correct tension, remove foreign matters, install protective cover, check cutting device and belt guide device.


Send Inquiry

whatsapp

Phone

VK

Inquiry