The advantages and disadvantages of chain transmission can only be truly reflected according to the comparison of other transmission methods:
1. Compared with the belt drive, the chain drive has no elastic sliding and slipping, and can maintain an accurate average transmission ratio;
the required tension force is small, and the pressure acting on the shaft is also small, which can reduce the friction loss of the bearing; the structure is compact;
Work under harsh environmental conditions such as high temperature and oil pollution. Compared with the gear transmission, the manufacturing and installation precision requirements of the chain transmission are lower;
the transmission structure is simple when the center distance is large.
2. Compared with gear transmission, it can transmit motion and power when the centers of the two axes are far apart;
Able to work under low speed, heavy load and high temperature conditions and dusty environment;
Compared with belt transmission, it can ensure accurate average transmission ratio, transmit large power, and the force acting on the shaft and bearing is small;
High transfer efficiency, generally up to 0.95-0.97;
After the hinge of the chain is worn, the pitch becomes larger and causes shedding;
The requirements for installation and maintenance are relatively high, and the sprocket material is generally structural steel.
3. Chain drive and belt drive
Belt drive
Advantages: wide range of center distance, stable transmission, low noise, cushioning and shock absorption, overload protection, simple structure, low cost, and easy installation.
Disadvantages: there is sliding, the transmission ratio is not constant, the outer dimension is large, the life of the belt is short, it is not suitable for inflammable and explosive occasions, and the force on the shaft and bearing is relatively large.
Chain drive
Advantages: The range of center distance is large, it can work under harsh conditions, and the force on the shaft and bearing is small.
Disadvantages: The instantaneous speed is unstable during operation, there are shocks, vibrations and noises, and the manufacturing precision is high. The service life is about 2~3 times that of the belt drive.




