Aug 21, 2024 Leave a message

Coupling Introduction

A coupling is a device that connects two shafts or a shaft and a rotating part, so that they rotate together during the transmission of motion and power and do not disengage under normal circumstances. It is sometimes also used as a safety device to prevent the connected parts from being subjected to excessive loads, thus playing the role of overload protection.


A coupling is also called a coupling. It is a mechanical component used to firmly connect the driving shaft and the driven shaft in different mechanisms so that they rotate together and transmit motion and torque. It is sometimes also used to connect shafts with other parts (such as gears, pulleys, etc.). It is usually composed of two halves, which are connected by keys or tight fits, fastened to the two ends of the shaft, and then connected in some way. The coupling can also compensate for the offset (including axial offset, radial offset, angular offset or combined offset) between the two shafts due to inaccurate manufacturing and installation, deformation during operation or thermal expansion, as well as to mitigate impact and absorb vibration. 


Most commonly used couplings have been standardized or normalized. In general, you only need to correctly select the type of coupling and determine the model and size of the coupling. If necessary, the load capacity of its vulnerable weak links can be checked and calculated; when the speed is high, it is also necessary to verify the centrifugal force on the outer edge and the deformation of the elastic elements, and perform balance checks, etc.

 

Couplings can be divided into two categories: rigid couplings and flexible couplings.


Rigid couplings do not have the ability to buffer and compensate for the relative displacement of the two axes, and require the two axes to be strictly aligned. However, this type of coupling has a simple structure, low manufacturing cost, easy assembly and maintenance, can ensure that the two axes have a high degree of alignment, transmit a large torque, and is widely used. Commonly used ones include flange couplings, sleeve couplings, and clamp couplings.


Flexible couplings can be divided into flexible couplings without elastic elements and flexible couplings with elastic elements.

 

The former only has the ability to compensate for the relative displacement of the two axes, but cannot buffer and reduce vibration. Common ones include slider couplings, gear couplings, universal couplings and chain couplings. The latter contains elastic elements. In addition to the ability to compensate for the relative displacement of the two axes, it also has buffering and vibration reduction effects. However, the transmitted torque is limited by the strength of the elastic elements and is generally not as good as that of flexible couplings without elastic elements. Common ones include elastic sleeve pin couplings, elastic pin couplings, plum blossom couplings, tire couplings, serpentine spring couplings and leaf couplings.

Send Inquiry

whatsapp

Phone

VK

Inquiry