Annealing is to heat the workpiece to an appropriate temperature, adopt different holding times according to the material and the size of the workpiece, and then slowly cool it. Get organized. Normalizing is to heat the workpiece to a suitable temperature and then cool it in the air. The effect of normalizing is similar to that of annealing, but the obtained structure is finer. It is often used to improve the cutting performance of materials, and sometimes it is used for some parts with low requirements. as final heat treatment. Quenching is to rapidly cool the workpiece in quenching media such as water, oil or other inorganic salts and organic aqueous solutions after heating and heat preservation. After quenching, the steel part becomes hard, but at the same time it becomes brittle. In order to eliminate the brittleness in time, it generally needs to be tempered in time. In order to reduce the brittleness of steel parts, the quenched steel parts are kept for a long time at an appropriate temperature higher than room temperature but lower than 650 ° C, and then cooled. This process is called tempering.
Annealing, normalizing, quenching, and tempering are the "four fires" in the overall heat treatment. Among them, quenching and tempering are closely related, and they are often used together, and both are indispensable.




