Jan 25, 2023 Leave a message

Gear Failure Form - Tooth Surface Fatigue

Gear Failure Form - Tooth Surface Fatigue
Tooth surface fatigue is divided into tooth surface pitting and tooth surface spalling.
Tooth surface fatigue is mainly due to the microscopic fatigue cracks caused by the alternating stress on the working surface. After the lubricating oil enters the crack, due to the meshing process, the entrance may be closed first and then squeezed. The lubricating oil in the microscopic fatigue crack expands the crack under high pressure, and the result Pitting corrosion occurs when small pieces of metal break away from the tooth surface, leaving a small pit. If the fatigue cracks on the surface extend deeper and farther or a series of small pits are connected due to the failure of the material between the pits, causing large areas or large pieces of metal to fall off, this phenomenon is called spalling.
The occurrence of tooth surface fatigue is generally at the root surface near the pitch line.
The occurrence of tooth surface fatigue is usually closed transmission.
Preventive measures for tooth surface fatigue include increasing the tooth surface hardness, reducing the surface roughness value, reasonably selecting the viscosity of lubricating oil, and adopting accurate displacement gear transmission.

Send Inquiry

whatsapp

Phone

VK

Inquiry