Generally, there are gear teeth, tooth grooves, end faces, normal surfaces, addendum circles, root circles, base circles, and indexing circles.
Gear tooth
For short, the tooth is each convex part of the gear used for meshing. These convex parts are generally arranged in a radial manner. The teeth on the paired gear contact each other, which can make the gear continuously mesh.
Alveolar
Is the space between two adjacent gear teeth on the gear; The end face is the plane perpendicular to the axis of the gear or worm on the cylindrical gear or worm.
end face
It is the plane at both ends of the gear.
Normal plane
It refers to the plane perpendicular to the gear tooth line.
Addendum circle
It refers to the circle where the top of the tooth is located.
Dedendum circle
It refers to the circle where the groove bottom is located.
Base circle
A circle in which the generating line of an involute is formed as a pure roll.
Dividing circle
It is the reference circle for calculating the geometric dimensions of the gear in the end face.




