The service life of the sprocket is short, which is far from meeting the requirements of production practice. According to the service condition, processing status and manufacturing technology of the sprocket, some improvement measures are proposed for the sprocket:
(1) The design material of the original sprocket is 40Cr, the overall hardening and tempering hardness is HB220~250, and the tooth quenching is HRC48~52. This method can not improve the wear resistance of the sprocket basically because of the limited hardening hardness of the teeth. It is suggested that the sprocket material be changed to 20CrMnTi, carburized and quenched, and the hardness of the chain socket can reach above HRC60, and its wear resistance is more than 2.5 times that of 40Cr material. This can greatly improve the service life of the sprocket, reduce the frequency of repair, improve productivity and reduce production costs;
(2) The shape of the original sprocket socket is forged and formed directly. In this way, the size error is large, the surface is rough, and the wear resistance is reduced. With the wide application of numerical control machine tools and the reduction of processing costs, it is recommended to leave a little margin after forging and finish machining by numerical milling to improve the dimensional accuracy and surface roughness, so as to improve the wear resistance.




