Main reasons for gear failure
1) Manufacturing error
Gear manufacturing errors mainly include eccentricity, tooth pitch deviation and tooth profile error. Eccentricity means that the geometric center and rotation center of a gear (generally a rotating body) do not coincide. Tooth pitch deviation means that there is a large error between the actual pitch of the gear and the nominal pitch, and the tooth profile error means that the involute tooth profile has a error.
2) Poor assembly
Improper assembly of gears can cause deterioration in working condition. When a pair of intermeshing gear shafts are not parallel, only one end will contact in the tooth width direction, or there will be a linear deviation of the gear, etc., so that the load on the gear is uneven in the tooth width direction, and the dynamic torque cannot be transmitted smoothly. This situation is called "one-end contact", and it will cause excessive load on the part of the tooth, which may cause tooth breakage.
3) Poor lubrication
For high-speed and heavy-duty gears, poor lubrication will lead to local overheating of the tooth surface, resulting in discoloration, gluing and other failures. There are many reasons for poor lubrication. In addition to blockage of oil passages and oil injection holes, water ingress in lubricating oil, deterioration of lubricating oil, and excessive oil temperature will all cause poor lubrication of tooth surfaces.
4) overload
For gear drives with unstable workloads (such as ore crushers, excavators, etc.), overload often occurs, and if there are no proper protection measures, it will cause overloading and fracture of gear teeth, or long-term overloading will cause a large number of tooth roots to fatigue Crack, break.
5) Operation error
Operation errors usually include lack of oil, overload, long-term overspeed, etc., which will cause gear damage and damage.




