Pulleys are disc hub parts. They are generally relatively large in size. The manufacturing process is generally based on casting and forging. Generally, larger designs are cast. The materials are generally cast iron (better casting performance), and cast steel is rarely used (steel has poor casting performance); generally, smaller ones can be designed for forging, and the material is steel. Pulleys are mainly used in occasions where power is transmitted over long distances, such as the output of small diesel engine power, agricultural vehicles, tractors, automobiles, mining machinery, mechanical processing equipment, textile machinery, packaging machinery, lathes, forging machines, some small horsepower motorcycle power transmission, agricultural machinery power transmission, air compressors, reducers, reducers, generators, cotton ginning machines, etc.
The selection of various indicators and materials of pulleys is based on the principle of minimizing raw materials, feasible processes, and lowest costs on the premise of being able to meet the requirements of use.
Material of pulley:
1. The material of the pulley used by the ventilator is gray cast iron HT200, HT250, etc. (but steel, copper, aluminum, etc. can also be used according to customer needs).
2. The pulley should meet the following requirements: light weight, uniform mass distribution, elimination of internal stress generated during manufacturing, and static balance correction of the pulley.
The specifications of the V-belt are divided by the back width (top width) and height (thickness). According to the different back width (top width) and height (thickness) dimensions, the national standard stipulates the V-belt O, A, B, C, D, E and other models. The section width, top width and height of each model of V-belt are different, so the pulley must be made into various groove types according to the shape of the V-belt; these different groove types determine the pulley O-type pulley, A-type pulley, B-type pulley, C-type pulley, D-type pulley, E-type pulley and other models.




