Aug 04, 2025 Leave a message

Roller Chain Categories

Roller Chain Classification


Based on their application, chains can be divided into three categories: lifting chains, traction chains, and transmission chains.

 

Lifting chains are primarily used to lift loads in hoisting machinery, with an operating speed of v≤0.25 m/s;

 

traction chains are primarily used to move loads in chain conveyors, with an operating speed of v≤4 m/s;

 

and transmission chains are used to transmit motion and power in general machinery, typically operating at speeds of v≤15 m/s.

 

Transmission chains are divided into two types: toothed chains and roller chains.

 

Toothed chains utilize meshing links with sprockets, each with a specific tooth profile. They provide smooth, low-noise transmission, earning them the name "silent chain drive." Toothed chains can operate at speeds up to 40 m/s, but are expensive to manufacture and heavy, making them primarily used in applications requiring high speeds or high precision. Chains used for power transmission primarily include bush roller chains and toothed chains.

 

Bush roller chains consist of inner and outer link plates, bushes, pins, and rollers. The outer link plates are fixed to pins, and the inner link plates are fixed to bushes. Both the rollers and bushes, and the bushes and pins, can rotate relative to each other. Therefore, the engagement between the chain and sprocket is primarily due to rolling friction. Bush roller chains can be used in single or multiple rows, with multiple rows enabling greater power transmission. Bush roller chains are lighter, have a longer lifespan, and are less expensive than toothed chains. They are widely used in power transmission. Toothed chains consist of multiple pairs of chain plates with 60° running surfaces, assembled using pins. The running surfaces of the chain plates mesh with the sprockets. To prevent the chain from falling off the sprockets during operation, the chain is equipped with inner or outer guide plates. When engaged, the guide plates engage corresponding guide grooves on the sprockets. Toothed chains offer smooth transmission and low noise, earning them the name "silent chains." They are commonly used in high-speed transmissions. The tooth profiles of bush roller chains and toothed chain sprockets should ensure that the chain elements can freely enter and exit meshing, with minimal impact during engagement and good contact during engagement.

Send Inquiry

whatsapp

Phone

VK

Inquiry