Chains can be divided into 1. Transmission chain: (Type A and Type B) short pitch fine bushing chain for transmission, double pitch fine roller chain for transmission, toothed chain for transmission,
2. Conveyor chain: short pitch fine roller conveyor chain, double pitch roller conveyor chain, long pitch conveyor chain, flat top chain for conveyor, short pitch fine bushing chain for conveyor, light double hinged suspension conveyor chain,
3. Plate chain:
4. Special-shaped chain and various accessories.
Double pitch chain has large roller and small roller; chain plate thickness has two types: regular and thickened;
Accessories (bent plates) have four forms: single-side single hole (A1 type), single-side double holes (A2 type), double-side single hole (K1 type), double-side double holes (K2 type).
The detailed models of double pitch are as follows:
P=25.4 (C208A, C208AL; C208B, C208BL)
P=31.75 (C210A, C210AL)
P=38.1 (C212A, C212AL; C212AH, C212AHL)
P=50.8 (C216A, C216AL; C216AH, C21 6AHL)
P=63.5 (C220A, C220AL; C220AH, C220AHL)
P=76.2 (C224A, C224AL; C224AH, C224AHL)
Differences between double pitch chain and single pitch chain
Some chains of the same model have double pitch models, here we take 40 as an example
The pitch of 40 chain is 12.7mm. When double pitch, the pitch becomes 25.4mm, just twice.
Single pitch chain is more suitable for driving, and double pitch is more suitable for conveying.
When 40 is compared with C2040, the chain plate, roller and inner pitch width are the same, but the pitch is different, so the sprocket can be shared
And 40 double pitch is divided into C2040 and C2042. 2042 is a large roller, which allows the roller to run directly on the track, which is more labor-saving. The only drawback is that the sprocket must be changed.
Characteristics of chain drive:
Chain drive is a transmission system that transmits the movement and power of the active sprocket with a special tooth shape to the driven sprocket with a special tooth shape through a chain. Chain drive has many advantages. Compared with belt drive, it has no elastic sliding and slipping phenomenon, the average transmission ratio is correct, the operation is reliable, and the efficiency is high; the transmission power is large, the overload capacity is strong, and the transmission size under the same working conditions is small; the required tension force is small, and the pressure acting on the shaft is small; it can work in harsh environments such as high temperature, humidity, dust, and pollution. The main drawbacks of chain drive are: it can only be used for transmission between two parallel shafts; it is high in cost, easy to wear, easy to stretch, and the transmission stability is poor. It will generate additional dynamic loads, vibration, impact and noise during operation, and it is not suitable for use in rapid reverse transmission.




