Jan 11, 2023 Leave a message

Comparison of helical gears and spur gears

Comparison of helical gears and spur gears:

Appearance: Spur gears can be identified by the number of teeth. The gears are radial and they are parallel to the axis of the gears. The teeth of a spur gear are exactly perpendicular to its plane. However, the number of teeth of a helical gear is exactly perpendicular to its plane. However, helical gears have teeth that are cut at an angle to the gear face. When two gears "interact" on a helical gear system, contact begins at one end of the gears. And, as the gear transmission gradually unfolds, until the two gears are fully meshed.

Manufacturing Cost: When exploring gear options, spur gears are usually the first choice. Spur gears are easier to manufacture and involve lower costs than helical gears.

Design: Spur gears have spur gears that are embedded on parallel shafts. This fact makes spur gears very simple in design. Also, this is easier to create compared to helical gears, which leads to a reduction in production costs.
Load carrying: Helical gears are able to carry more loads than spur gears because the load is distributed over more gears.

Durability: Helical gears are more durable than spur gears. Because, its load is distributed to more gears. Therefore, for a given gear, the force distribution will be better than that of a spur gear.

Running noise: The gears are very noisy, every time one gear tooth is in contact with another gear tooth, the teeth bump into each other, making noise. On the gear teeth, this also creates a lot of noise. In comparison, helical gears are quieter.

Efficiency: When the two gears are in contact, the helical gear is less efficient because the helical gear has more teeth in contact, which results in increased friction and, due to heat, more heat loss. Spur gears are more efficient.

Send Inquiry

whatsapp

Phone

VK

Inquiry