
Cut Flange Linear Bearing
Tianjin OuNaiDa Transmissions Technology Co., Ltd. is one of the leading manufacturers and suppliers of cut flange linear bearing in China. If you're going to buy high quality cut flange linear bearing, welcome to get more information from our factory. Also, custom service is available.
--- title: "LMH Series Cut Flange Linear Bearing" slug: ball-screw/lmh-cut-flange-linear-bearing type: product week: W47 date: 2026-11-17 category: Ball Screw main_image: media-output/W47-p3-lmh-cut-flange-linear-bushing.png meta_description: "LMH-UU oval cut flange linear ball bearings, shaft 6 to 30 mm. Same body and load rating as LMF/LMK, flange cut narrow for tight mounting plates. Full dimension and load table." keywords: LMH linear bearing, LMH6UU, LMH8UU, LMH10UU, LMH12UU, LMH16UU, LMH20UU, LMH25UU, LMH30UU, cut flange linear bearing, oval flange linear bushing ---
A 3D printer builder wanted two 12 mm shafts on a carriage plate 30 mm wide. The standard flange on an LMF12/LMK12 is 32 mm - too wide.
The LMH12 flange is 27 mm across.
That is the whole reason this bearing exists. The LMH is the same linear ball bearing body as the LMF and LMK, with the flange cut flat on two sides. Load rating, bore, outside diameter and length stay the same. Only the width across the flange changes.
LMH vs LMF/LMK: Only the Flange Changes
From our LMH and LMF/LMK catalogue tables:
| Size | Body D x L (mm), all three | Flange width across cut, LMH (mm) | Flange W, LMF/LMK (mm) | Dynamic C (N), all three | Static C0 (N), all three |
|---|---|---|---|---|---|
| 6 | 12 x 19 | 18 | 22 | 206 | 265 |
| 8 | 15 x 24 | 21 | 25 | 274 | 392 |
| 10 | 19 x 29 | 25 | 30 | 372 | 549 |
| 12 | 21 x 30 | 27 | 32 | 510 | 784 |
| 16 | 28 x 37 | 34 | 37 | 774 | 1180 |
| 20 | 32 x 42 | 38 | 42 | 882 | 1370 |
| 25 | 40 x 59 | 46 | 50 | 980 | 1570 |
| 30 | 45 x 64 | 51 | 58 | 1570 | 2740 |
Because the bore and body are identical, an LMH runs on exactly the same shaft as the LMF/LMK. You can mix them on one machine.
Full Dimension and Load Table
| Model | Shaft dr | Bore tol. (µm) | D | D tol. (µm) | Df | L | W | t | A | F | X | Y | Z | C (N) | C0 (N) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LMH6UU | 6 | 0 / -9 | 12 | 0 / -13 | 28 | 19 | 18 | 5 | 20 | - | 3.5 | 6 | 3.1 | 206 | 265 | 21 |
| LMH8UU | 8 | 0 / -9 | 15 | 0 / -13 | 32 | 24 | 21 | 5 | 24 | - | 3.5 | 6 | 3.1 | 274 | 392 | 33 |
| LMH10UU | 10 | 0 / -9 | 19 | 0 / -16 | 40 | 29 | 25 | 6 | 29 | - | 4.5 | 7.5 | 4.1 | 372 | 549 | 64 |
| LMH12UU | 12 | 0 / -9 | 21 | 0 / -16 | 42 | 30 | 27 | 6 | 32 | - | 4.5 | 7.5 | 4.1 | 510 | 784 | 68 |
| LMH13UU | 13 | 0 / -9 | 23 | 0 / -16 | 43 | 32 | 29 | 6 | 33 | - | 4.5 | 7.5 | 4.1 | 510 | 784 | 81 |
| LMH16UU | 16 | 0 / -9 | 28 | 0 / -16 | 48 | 37 | 34 | 6 | 31 | 22 | 4.5 | 7.5 | 4.1 | 774 | 1180 | 112 |
| LMH20UU | 20 | 0 / -10 | 32 | 0 / -19 | 54 | 42 | 38 | 8 | 36 | 24 | 5.5 | 9 | 5.1 | 882 | 1370 | 167 |
| LMH25UU | 25 | 0 / -10 | 40 | 0 / -19 | 62 | 59 | 46 | 8 | 40 | 32 | 5.5 | 9 | 5.1 | 980 | 1570 | 325 |
| LMH30UU | 30 | 0 / -10 | 45 | 0 / -19 | 74 | 64 | 51 | 10 | 49 | 35 | 6.6 | 11 | 6.1 | 1570 | 2740 | 388 |
Dimensions in mm. Length tolerance ±0.3 mm. Df = flange diameter before cutting, W = width across the cut flats, t = flange thickness. X / Y / Z = fixing hole dimensions per catalogue drawing. UU = sealed both ends. Eccentricity and squareness: 12 µm up to LMH16, 15 µm from LMH20.
The Fixing Hole Change at Size 16
This catches people who scale a drawing up.
- LMH6 to LMH13: two fixing holes.
- LMH16 to LMH30: four fixing holes - dimension F appears in the table.
If you designed a plate for an LMH12 and then moved to 16 mm shafts, the two-hole pattern no longer fits. Redraw the plate.
Other Things Worth Getting Right
The cut flange does not change the bearing rating. C and C0 are identical to LMF/LMK. A single linear bearing on a single shaft still cannot take a moment load well whatever its flange looks like - on a carriage with an offset load, use two bearings per shaft spaced apart, or two shafts.
The shaft is the raceway. The balls run directly on the shaft surface. A soft or unground shaft will track within weeks no matter which bearing is on it. Use a hardened, ground linear shaft.
Check the bore tolerance against your shaft. The bore is minus 9 to 10 µm. A shaft at the top of a loose tolerance band gives a visible rattle; a shaft that is slightly oversize makes the bearing stiff. Match them.
Where LMH Fits
- 3D printers and desktop CNC with narrow carriage plates
- Pick-and-place heads with two parallel shafts close together
- Fixtures and jigs where the bearing sits against a wall or a second part
If the load or accuracy is beyond what round shafts can hold, a profiled linear guideway is the step up.
What to Send Us
1. Shaft diameter and model 2. Quantity of bearings 3. Shaft length and end machining, if you need shafts too 4. Mounting plate width, if you are unsure LMH will fit
OEM and ODM accepted. Samples available.
Precision Motion Components | Empowering Global Intelligent Manufacturing
Hot Tags: cut flange linear bearing, China cut flange linear bearing manufacturers, suppliers, factory
You Might Also Like
Send Inquiry










