Cylindrical Ball Screw Nut

Cylindrical Ball Screw Nut

--- title: "SCNI Series Cylindrical Ball Screw Nut" slug: ball-screw/scni-cylindrical-ball-screw-nut type: product week: W47 date: 2026-11-17 category: Ball Screw main_image: media-output/W47-p2-scni-cylindrical-ball-nut.png meta_description: "SCNI and SCI straight cylinder ball...
Send Inquiry
Product Introduction

Tianjin OuNaiDa Transmissions Technology Co., Ltd. is one of the leading manufacturers and suppliers of cylindrical ball screw nut in China. If you're going to buy high quality cylindrical ball screw nut, welcome to get more information from our factory. Also, custom service is available.

 

--- title: "SCNI Series Cylindrical Ball Screw Nut" slug: ball-screw/scni-cylindrical-ball-screw-nut type: product week: W47 date: 2026-11-17 category: Ball Screw main_image: media-output/W47-p2-scni-cylindrical-ball-nut.png meta_description: "SCNI and SCI straight cylinder ball screw nuts, shaft 16 to 80 mm. Same nut OD and load ratings as the flange SFI nut, but shorter and lighter. Full dimension and load table." keywords: SCNI ball screw nut, SCNI1605, SCNI2005, SCNI2510, SCNI3210, SCNI4010, SCI1604, SCI2504, cylindrical ball nut, flangeless ball screw nut, straight cylinder ball nut ---

"The flange is in the way."

We hear that most often from builders of compact actuators and multi-axis heads. The nut sits inside a machined carriage, the carriage is already as short as it can be, and a 10 to 18 mm flange plus its bolt circle is the part that will not fit.

The SCNI and SCI nuts drop the flange. The body is a plain steel cylinder that sits in a bored housing. Everything that matters for load - nut outside diameter, ball size, circuits, load rating - stays the same as the flange SFI nut of the same size.

Same Ratings, Shorter Nut

Every figure below comes from our SFI and SCNI/SCI catalogue tables.

Size Nut OD D (mm), both Ca (kgf), both SFI nut length (mm) SCNI/SCI length (mm) SFI weight (kg) SCNI/SCI weight (kg)
1604 30 973 45 40 0.246 0.14
1605 30 1380 50 45 0.220 0.146
2005 34 1551 51 45 0.308 0.17
2505 40 1724 51 45 0.396 0.226
2510 46 2954 85 85 0.802 0.664
3205 46 1922 52 45 0.472 0.252
3210 54 4805 90 85 1.14 0.784
4005 56 2110 55 45 0.840 0.406
4010 62 5399 93 85 1.548 0.932
5010 72 6004 93 85 1.924 1.21

Static rating and rigidity also match between the two series in every size listed. What you give up is the flange - and with it the ability to bolt the nut straight onto a plate.

The weight saving is real on a moving carriage. On the 4010 size the cylindrical nut weighs 0.932 kg against 1.548 kg for the flange version.

Full Dimension and Load Table

Lead 4 models carry the SCI code; lead 5 and 10 models carry SCNI. Our catalogue lists both as the strong dust-proof straight cylinder type.

Model Shaft d Lead Ball dia. Nut OD D Nut length L L1 L2 Circuits Ca (kgf) Coa (kgf) Rigidity (kgf/µm) Weight (kg)
SCI1604-4 16 4 2.381 30 40 9 15 1x4 973 2406 32 0.14
SCNI1605-4 16 5 3.175 30 45 9 20 1x4 1380 3052 33 0.146
SCI2004-4 20 4 2.381 34 40 9 15 1x4 1066 2987 37 0.16
SCNI2005-4 20 5 3.175 34 45 9 20 1x4 1551 3875 39 0.17
SCI2504-4 25 4 2.381 40 40 9 15 1x4 1180 3795 43 0.22
SCNI2505-4 25 5 3.175 40 45 9 20 1x4 1724 4904 45 0.226
SCNI2510-4 25 10 4.762 46 85 13 30 1x4 2954 7295 51 0.664
SCI3204-4 32 4 2.381 46 40 9 15 1x4 1296 4838 49 0.2
SCNI3205-4 32 5 3.175 46 45 9 20 1x4 1922 6343 52 0.252
SCNI3210-4 32 10 6.35 54 85 13 30 1x4 4805 12208 62 0.784
SCNI4005-4 40 5 3.175 56 45 9 20 1x4 2110 7988 59 0.406
SCNI4010-4 40 10 6.35 62 85 13 30 1x4 5399 15500 72 0.932
SCNI5010-4 50 10 6.35 72 85 13 30 1x4 6004 19614 83 1.21
SCNI6310-4 63 10 6.35 85 85 13 30 1x4 6719 25358 95 1.52
SCNI8010-4 80 10 6.35 105 85 13 30 1x4 7346 31953 109 2.292

Dimensions in mm. Load ratings are in kgf (1 kgf = 9.81 N).

Where Cylindrical Nuts Go Wrong

Nothing stops the nut turning. A flange nut is held by its bolts. A cylindrical nut in a bore is held by whatever you design in - a key or a pin into the housing. Leave it out and the nut spins with the screw instead of travelling along it. Confirm the anti-rotation detail with us before you machine the housing.

Nothing stops it sliding out either. Thrust goes through the nut in both directions. Give it a shoulder on one side and a clamp ring or retaining plate on the other. A set screw onto the outside diameter is not an axial stop.

Mixing units in the load calculation. Our tables give Ca and Coa in kgf. Many motor and guide datasheets are in N or kN. SCNI2005-4 at 1551 kgf is about 15.2 kN - read it as 1.55 kN and you will oversize everything, read 1551 N and you will undersize it by a factor of ten.

Choosing Between SCNI and the Flange Nuts

Pick the cylindrical nut when length and moving mass matter more than ease of mounting: compact actuators, linear modules, carriages machined from solid.

Pick a flange nut when the nut bolts to a plate or a standard housing. In that case look at the SFI flange nut, the larger SFI3210, or the sealed SFNU nut for dusty machines. Flange nuts also pair directly with our nut housings.

The shaft end does not change with the nut type. The same support units and end machining apply.

What to Send Us

1. Model, or shaft diameter and lead 2. Total screw length and thread length 3. Shaft end drawing, or the support units you use 4. How the nut will be held in your housing 5. Load, speed and orientation 6. Quantity

See the full ball screw range.

OEM and ODM accepted. Samples available.

Precision Motion Components | Empowering Global Intelligent Manufacturing

Hot Tags: cylindrical ball screw nut, China cylindrical ball screw nut manufacturers, suppliers, factory

Send Inquiry

whatsapp

Phone

VK

Inquiry