Annealing mainly refers to a heat treatment process in which a material is exposed to high temperature for a long period of time and then slowly cooled. The main purpose is to release stress, increase material ductility and toughness, produce special microstructure, etc.
The annealing process includes complete annealing, spheroidizing annealing, isothermal annealing, graphite annealing, diffusion annealing, stress relief annealing, incomplete annealing, post-weld annealing, etc.
Annealing is a metal heat treatment process in which the metal is slowly heated to a certain temperature, kept for a sufficient time, and then cooled at an appropriate rate.
Annealing heat treatment is divided into complete annealing, incomplete annealing and stress relief annealing, diffusion annealing, spheroidizing annealing, recrystallization annealing. The mechanical properties of annealed materials can be detected by tensile test or hardness test. Many steel products are supplied in the state of annealing and heat treatment. Rockwell hardness tester can be used to test the hardness of steel. For thinner steel plates, steel strips and thin-walled steel pipes, surface Rockwell hardness testers can be used to test HRT hardness. .Heating the steel to a certain temperature above or below the critical point Ac1, holding it for a period of time, and then cooling it slowly in a furnace or buried in a furnace or a medium with poor thermal conductivity to obtain a stable structure close to an equilibrium state .
Purpose:
① Improve or eliminate various structural defects and residual stresses caused by steel casting, forging, rolling and welding, and prevent deformation and cracking of workpieces;
② soften the workpiece for cutting;
③ Refining the grain, improving the structure to improve the mechanical properties of the workpiece;
④ Make organizational preparations for final heat treatment (quenching, tempering).




