The absolute value judgment method uses the amplitude value measured at the same measuring point on the gearbox as the index to evaluate the running state directly.
When using absolute value judgment method to identify gear status, corresponding judgment standards must be formulated according to different gear boxes and different use requirements.
The criteria for determining the absolute value of gears are mainly based on the following:
1) Theoretical research on abnormal vibration;
(2) Analysis of vibration phenomenon according to the experiment;
(3) Statistical evaluation of measured data;
(4) Refer to relevant standards at home and abroad.
In fact, there is no absolute value judgment standard applicable to all gears. When the size and type of gears are different, the judgment standard will be different.
When judging the broadband vibration according to a measured parameter, the standard value must be changed according to the frequency. If the frequency is below 1kHz, the vibration shall be determined according to the speed; The frequency is above 1kHz, and the vibration is judged according to the acceleration. The actual standard depends on the specific situation.




