Oct 31, 2022 Leave a message

The Method Of Determining The Phase Time Value Of Gears

In practical application, for the gear whose absolute value judgment standard has not been formulated, the field measured data can be fully used for statistical average, and appropriate relative judgment standard can be formulated. This standard is called relative value judgment method.

The relative judgment standard requires that the amplitude measured at different times at the same measuring point of the gearbox shall be compared with the amplitude in the normal state. When the measured value is compared with the normal value to a certain extent, it shall be judged as a certain state. For example, the relative value judgment standard stipulates that attention should be paid when the actual value reaches 1.6~2 times of the normal value, and when it reaches 2.56~4 times, it indicates danger, etc. As for whether to grade by 1.6 times or 2 times, depending on the use requirements of the gearbox, relatively rough equipment (such as mining machinery) generally uses a higher multiple classification.

In practice, in order to achieve the best effect, the above two methods can be used at the same time for comparison and comprehensive evaluation.


Send Inquiry

whatsapp

Phone

VK

Inquiry