Mar 06, 2023 Leave a message

Phosphating And Application

Phosphating is a process in which chemical and electrochemical reactions form a phosphate chemical conversion film, and the formed phosphate conversion film is called a phosphating film.
The purpose of phosphating is mainly to provide protection for the base metal and prevent the metal from being corroded to a certain extent; it is used as a primer before painting to improve the adhesion and anti-corrosion ability of the paint film layer; it plays an anti-friction lubrication role in the metal cold processing process use. The phosphating treatment process has been applied in industry for more than 90 years, which can be roughly divided into three periods: the period of laying the foundation of phosphating technology, the period of rapid development of phosphating technology and the period of wide application.

phosphorization
Phosphating use
1. Phosphating
(1) The role of phosphating before painting
①Enhance the bonding force between the coating film layer (such as paint coating) and the workpiece.
② Improve the corrosion resistance of the surface coating of the workpiece after painting.
③ Improve decoration.
(2) The role of non-painting phosphating
① Improve the wear resistance of the workpiece.
② Make the workpiece lubricious during machining.
③ Improve the corrosion resistance of the workpiece.
2. Phosphating application
Iron and steel phosphating is mainly used for corrosion protection and base film for paint.
(1) Phosphate coating for corrosion protection
①Phosphating film for protection It is used for corrosion protection treatment of steel parts. The type of phosphating film can be zinc-based or manganese-based. The mass per unit area of the membrane is 10-40g/m2. After phosphating, apply anti-rust oil, anti-rust grease, anti-rust wax, etc.
②Phosphating film for the bottom layer of paint
Increase the adhesion and protection of paint film and steel workpiece. The type of phosphating film can be zinc-based or zinc-calcium-based. The mass per unit area of the phosphating film is 0.2-1.0g/m2 (for the paint bottom layer of steel parts with large deformation); 1-5g/m2 (for the paint bottom layer of general steel parts); Deformed steel parts paint primer).
(2) Phosphate coating for cold working lubrication
Steel wire and welded steel pipe drawing, the film weight per unit area is 1-10g/m2; precision steel pipe drawing, the film weight per unit area is 4-10g/m2; steel parts cold extrusion forming, the film weight per unit area is greater than 10g/m2.
(3) Phosphate coating for friction reduction
Phosphate film can play a role in reducing friction. Generally, manganese phosphating is used, and zinc phosphating can also be used. For workpieces with small dynamic fit clearance, the quality of phosphating film is 1-3g/m2; for workpieces with large dynamic fit clearance (reduction box gear), the quality of phosphating film is 5-20g/m2.
(4) Phosphate film for electrical insulation
Generally, zinc phosphating is used. It is used for phosphating treatment of silicon wafers in motors and transformers.

Send Inquiry

whatsapp

Phone

VK

Inquiry