May 20, 2025 Leave a message

Roller Chain Classification

Roller chain classification

 

Stainless steel chain
The parts are made of stainless steel, suitable for use in the food industry and in places susceptible to chemical and pharmaceutical corrosion, and can also be used in high and low temperature places.


Three types of chains
All chains made of carbon steel materials can be surface treated, and the surface of the parts is nickel-plated, zinc-plated or chrome-plated, which can be suitable for outdoor rain erosion and other occasions, but cannot prevent corrosion from concentrated chemical liquids.


Self-lubricating chain
The parts are made of a sintered metal soaked in lubricating oil. The chain has excellent wear resistance and corrosion resistance, does not require maintenance (maintenance-free), and has a long service life. It is widely used in places with high force, wear resistance requirements, and cannot be maintained frequently, such as food industry automated production lines, high-end bicycle racing, and low-maintenance high-precision transmission machinery.


Seal ring chain
An O-ring seal is installed between the inner and outer chain plates of the roller chain to prevent dust from entering and grease from flowing out of the hinge. The chain is strictly pre-lubricated. Because the chain has super strong parts and reliable lubrication, it can be used in open transmissions such as motorcycles.


Rubber chain
This type of chain is based on the outer link of the A and B series chains with a U-shaped attachment plate. Rubber (such as natural rubber NR, silicone rubber SI, etc.) is glued to the attachment plate to increase wear resistance, reduce noise, and increase shock resistance. Used for transportation.


Sharp tooth chain
Widely used in the wood industry, such as feeding and output of wood, cutting, conveyor conveying, etc.


Agricultural machinery chain
Applicable to field operation machinery such as hand tractors, threshers, combine harvesters, etc. This chain requires low cost but can withstand impact and wear resistance. In addition, the chain should be greased or automatically lubricated.


High-strength chain
It is a special roller chain. By improving the shape of the chain plate, thickening the chain plate, fine-blanking the chain plate holes, and strengthening the pin shaft through heat treatment, the tensile strength can be increased by 15~30%, and it has good impact performance and fatigue performance.


Side bending chain
This chain has a large hinge gap and chain plate gap, so it has greater flexibility and can be used for bending transmission and transportation.


Escalator chain
Used for escalators and automatic pedestrian walkways. Since the escalator has a long working time, high safety requirements and smooth operation. Therefore, it is required that the step chain must reach the specified minimum ultimate tensile load, the total length deviation of the two paired chains, and the step distance deviation.


Motorcycle chain
Defined by the purpose of the chain, from the structure of the chain, there are two types: roller chain and sleeve chain. From the part used on the motorcycle, it is divided into two types: engine use and engine use. Most of the chains used in the engine are sleeve chain structures, and the chains used outside the engine are transmission chains used to drive the rear wheel, and most of them use roller chains.


Clamping conveyor chain
Suitable for walking wheat and rice harvesters and fixed motorized rice and wheat threshers, as well as semi-feeding combine harvesters.


Hollow pin chain
Used for conveying, single pitch, double pitch, and long pitch are all available. Accessories or crossbars can be inserted into any link of the chain without disassembling the chain.


Timing chain
Used for transmission between the engine crankshaft and camshaft. Since there are strict requirements for the coordination of engine piston stroke and exhaust time, the chain used for this purpose is called a timing chain. Both roller chains and toothed chains can be used as timing chains. Timing chains are mainly used for the transmission of engines (diesel or gasoline engines) in automobiles, motorcycles and ships. In order to reduce the weight of the engine, the installation gap between the chain and the engine is very small, and some even have no tensioning device. Therefore, in addition to high precision requirements, the timing chain also requires high wear resistance.

Send Inquiry

whatsapp

Phone

VK

Inquiry