May 13, 2025 Leave a message

Roller Chain Cleaning

Chain cleaning

Precautions
Do not soak the chain directly in strong acidic and alkaline cleaning agents such as diesel, gasoline, kerosene, WD-40, and degreasing agents, because the inner ring bearing of the chain is injected with high-viscosity oil. Once it is washed off, the inner ring will become dry. No matter how much low-viscosity chain oil is added afterwards, it will be useless.

Recommended cleaning method
Hot soapy water, hand sanitizer, a discarded toothbrush or a slightly harder brush can also be used. The cleaning effect is not very good when directly scrubbing with water, and it needs to be wiped dry after cleaning, otherwise it will rust.
Special chain cleaning agents are generally imported products with good cleaning effects and good lubrication effects. They are sold in professional car shops, but the price is relatively expensive. Taobao also sells them. Car friends with a better economic foundation can consider them.
Metal powder, find a larger container, take a spoonful and rinse it with boiling water, remove the chain and put it in the water and clean it with a harder brush.
Advantages: It can easily clean the oil on the chain, and generally does not clean the butter in the inner ring. It is non-irritating and does not hurt the hands. This thing is often used by mechanical workers to wash their hands. It is very safe. It can be bought in larger hardware stores.
Disadvantages: Since the auxiliary is water, the chain must be wiped dry or air-dried after cleaning, and it takes a long time to use.
Using metal powder to clean the chain is my usual cleaning method. I personally feel that it works better. I recommend it to all riders. If any rider has objections to this cleaning method, please give your opinions. Riders who need to remove the chain frequently for cleaning are recommended to install a magic buckle, which saves time and effort.

Chain lubrication
After each cleaning, wiping or cleaning the chain with a solvent, be sure to add lubricating oil, and make sure the chain is dry before adding lubricating oil. First, penetrate the lubricating oil into the chain bearing part, and then wait for it to become sticky or dry. This can really lubricate the parts of the chain that are prone to wear (the joints on both sides). Good lubricants feel like water at first and penetrate easily, but after some time they become sticky or dry, providing long-lasting lubrication.
After applying lubricants, wipe off excess oil on the chain with a dry cloth to prevent dirt and dust from sticking. Before reinstalling the chain, remember to clean the joints between the chains to ensure that no dirt remains. After cleaning the chain, apply some lubricants to the inside and outside of the shaft before assembling the Velcro.

Send Inquiry

whatsapp

Phone

VK

Inquiry