Sep 19, 2024 Leave a message

The Turntable Bearing Seat

The turntable bearing seat is a large and extra-large bearing seat that can bear comprehensive loads and has a special structure. It has the characteristics of compact structure, flexible rotation, and easy installation and maintenance. Compared with ordinary bearing seats, the turntable bearing seat has the following obvious characteristics:


1. Overall dimensions
The diameter is usually 0.4cm~10m, and the maximum can reach 40m.


2. High load-bearing capacity
Generally, it can bear axial load, radial load and overturning moment load at the same time.


3. Low speed
The working speed is lower than 10r/min, and in a few cases, it does not rotate continuously, but only rotates within a certain angle and swings.


4. With bearing seat installation hole
It can be fastened to the upper and lower supports with screws.


5. No central axis
The inner ring or outer ring is equipped with a rotating drive gear.


6. With lubricating oil hole and seal installation.


The main structural forms of turntable bearing seats are:

four-point contact ball turntable bearing seat, double-row angular contact thrust ball turntable bearing seat, interlaced cylindrical roller turntable bearing seat, interlaced tapered roller turntable bearing seat, and three-row cylindrical roller match turntable bearing seat.
According to whether it has teeth and the distribution of gears, it can be divided into different structures such as non-toothed type, external tooth type or internal tooth type.


Among them, the four-point contact ball turntable bearing seat has a higher static load-bearing capacity, the interlaced cylindrical roller turntable bearing seat has a higher dynamic load-bearing capacity, the interlaced tapered roller turntable bearing seat can improve the support rigidity and rotation accuracy by applying preload, and the three-row cylindrical roller match turntable bearing seat increases the bearing seat height to improve the load-bearing capacity. The load recognition has different raceway acceptance, so under the same force condition, the bearing seat diameter can be greatly reduced, so that the host is more compact, and it is a turntable bearing seat with high load-bearing capacity.


Turntable bearing seats are widely used in large rotary installations of lifting and transportation machinery, mining machinery, construction machinery, port machinery, ship machinery and high-precision radars.

Send Inquiry

whatsapp

Phone

VK

Inquiry