Turbocharging is called TURBO for short. If you see TURBO or T at the rear of a car, it means that the engine used in the car is a turbocharged engine. For example, Volkswagen Bora's 1.8T, Passat's 1.8T, Audi's 2.0T, etc. The engine of these cars works by burning fuel in the engine cylinder to do work, thus outputting power. In the case of a certain engine displacement, if you want to improve the output power of the engine, the most effective way is to provide more fuel for combustion. However, it is easy to supply more fuel to the cylinder, but it is difficult to supply enough air to support the complete combustion of fuel by traditional engine intake system. Take the working principle of the gasoline engine as an example. For every 1kg of gasoline supplied to the cylinder, the cylinder needs about 15kg of air to ensure full combustion of gasoline. However, the volume of this 15kg air will be very large, and it is not easy to fully absorb such a large volume of air by virtue of the vacuum degree generated by the cylinder during the engine intake process. Therefore, it is particularly important to improve the ability of the engine to inhale gas, that is, to improve the inflation efficiency of the engine. Supercharging technology is a way to improve the intake capacity of the engine. In principle, it uses a special compressor to compress the gas before it enters the cylinder, so as to increase the density of the gas entering the cylinder and reduce the volume of the gas. In this way, the mass of the gas in the unit volume is greatly increased, and the intake volume can meet the fuel combustion needs, so as to improve the engine power. The compressor used in the supercharging process is also called the supercharger.
Nov 06, 2022
Leave a message
Working Principle Of Turbine
Send Inquiry




