Mar 14, 2023 Leave a message

Rack Processing Technology

As a precision transmission part, rack and pinion have very high requirements for manufacturing and processing technology. Just imagine that if a tiny tooth in the rack has a processing problem, it will cause the entire rack to fail to mesh with the gear, which proves that this is a waste rack. Therefore, a qualified rack must be put into use after multiple processing procedures. For example: hobbing, honing, shaping, shaving, grinding, etc. However, so many processing techniques are not static, and the processing techniques required for racks with inconsistent precision requirements will also be different.

rack with pinion gear

Rack processing technology:


1. Gear hobbing
A special component that needs to be used in gear hobbing is the gear hob, which can be regarded as a helical gear with a small number of teeth on the surface (generally the number of teeth is 1) but a long tooth length. The raw gear hob is wound around the shaft and notched and toothed using special machining tools. After this series of operations is completed, a gear hob capable of cutting the cutting edge and the rake angle and the rear angle is produced. Using a gear hob for rack hobbing is equivalent to meshing two helical gears, and due to the cutting action of the gear hob, gear hobbing is also achieved.


2. Honing
This processing technology belongs to the forming processing method. The main principle is to use a special milling cutter (or milling tooth), and it is required that the tooth section of the milling cutter and the gear section on the rack must correspond one-to-one. An obvious disadvantage of gear honing is that the efficiency of work and the precision of processing racks are not high, so some small batch orders can choose this processing technology. If you encounter large quantities or orders that require extremely high precision of the rack, the gear honing method is not suitable.

3. Shaping processing
The gear shaping process is similar to the gear hobbing process in form, and it is also a commonly used processing method in rack processing. The tool that the realization of gear shaping processing needs to rely on is called - gear shaping cutter. The gear shaper cutter and the gear hob work in different ways. The gear shaper cutter is used to move repeatedly to achieve the meshing between the gear shaper cutter and the raw material to be processed.


4. Shaving processing
The realization of this technological process is mainly due to the appearance of the gear shaving knife. The working precision of the gear shaving knife is very high, and it can control its own cutting action within a very precise space range. Therefore, if you need to fine-tune the rack and pinion, you can use a shaving cutter to perform micro-machining on the tooth surface, and the cut metal debris can even be calculated in milligrams.

 

5. Grinding processing
As for the gear grinding process, the gear grinding machine is mainly used to grind and finish the rack and gear. However, the use of gear grinding machines has special requirements for gears. In order to avoid unexpected situations such as broken and cracked gears during processing, it is necessary to perform hardness strengthening treatment on the gears to be processed in advance, and the strengthened gears can be processed by gear grinding machines. processing.

Send Inquiry

whatsapp

Phone

VK

Inquiry